01
科研试样
按研究变量制备标准或非标样件并保留过程记录。
07 / APPLICATION FIELD
Universities & Research Institutes
围绕课题目标组织样件设计、材料工艺开发、过程记录和性能验证，支持开放参数与实验教学需求。
TYPICAL APPLICATIONS
Typical applications
These scenarios describe common tasks and do not replace project-specific manufacturing evaluation.
02
材料工艺研究
围绕材料、扫描策略和工艺窗口开展实验。
03
复杂结构验证
通过点阵、薄壁和流道样件验证设计与制造边界。
04
实验与教学
兼顾开放工艺、操作训练和实验数据追溯。
ENGINEERING REVIEW
Confirm before the project starts
Model recommendations are an initial filter; final configuration depends on geometry, material, process and acceptance requirements.
- 01
研究变量、对照组和样件数量是否定义清楚
- 02
设备开放度、材料切换和过程记录是否满足实验设计
- 03
后处理与检测方案是否能够回答研究问题
RECOMMENDED SYSTEMS
Recommended systems
Initial matches based on the current product catalog; suitability must still be evaluated against the actual component.
Research, Medical & Training System
KHL-VT100
- Build envelope
- 110 × 110 × 100 mm
- Laser
- 500 W
A compact, open process platform for fine-feature research, medical and teaching applications. Evaluate further against the material, size and geometry of the target component.
View product details→
Research, Medical & Training System
KHL-VT160
- Build envelope
- 150 × 150 × 200 mm
- Laser
- 500 W
Combines research flexibility with a larger build envelope for multi-material process development. Evaluate further against the material, size and geometry of the target component.
View product details→
Entry Industrial Metal System
KHL-VT260
- Build envelope
- 250 × 250 × 300 mm
- Laser
- 500 W × 2
Dual-laser, bidirectional recoating for R&D transfer and small-to-medium industrial parts. Evaluate further against the material, size and geometry of the target component.
View product details→SUPPORTING SERVICES
Supporting technical services
Engage individual stages or combine services around project goals. Externally coordinated processes are identified in the final proposal.
- ＋试样与实验方案协同
- ＋金属3D打印
- ＋材料工艺开发
- ＋热处理与HIP衔接
- ＋Precision Machining
- ＋检测与性能评价
START A PROJECT
Have a drawing, material requirement or unresolved manufacturing challenge?
Share drawings, material, critical dimensions and target performance for an initial manufacturability assessment.