01
复杂内部流道
评估流道直径、转角、清粉路径和检测可达性。
06 / APPLICATION FIELD
Thermal Management & Liquid Cooling
面向复杂内部流道、液冷板和紧凑换热结构，协调流道设计、成形方向、清粉、密封和性能测试。
TYPICAL APPLICATIONS
Typical applications
These scenarios describe common tasks and do not replace project-specific manufacturing evaluation.
02
液冷部件
结合接口、密封面和加工基准规划一体化制造。
03
紧凑型换热结构
针对薄壁、换热面积和压降目标开展结构评估。
04
一体化冷却结构
把承载、安装与冷却功能组织在单一零件中。
ENGINEERING REVIEW
Confirm before the project starts
Model recommendations are an initial filter; final configuration depends on geometry, material, process and acceptance requirements.
- 01
流道结构是否可成形、可清粉和可检测
- 02
密封面、接口和加工余量是否已纳入设计
- 03
流量、压降、换热和耐压目标如何验证
RECOMMENDED SYSTEMS
Recommended systems
Initial matches based on the current product catalog; suitability must still be evaluated against the actual component.
Entry Industrial Metal System
KHL-VT260
- Build envelope
- 250 × 250 × 300 mm
- Laser
- 500 W × 2
Dual-laser, bidirectional recoating for R&D transfer and small-to-medium industrial parts. Evaluate further against the material, size and geometry of the target component.
View product details→Industrial & Automotive System
KHL-VT360
- Build envelope
- 350 × 350 × 300 mm
- Laser
- 500 W × 2
A general-purpose platform for industrial and automotive builds with full-field consistency. Evaluate further against the material, size and geometry of the target component.
View product details→Industrial & Aerospace System
KHL-VT460
- Build envelope
- 450 × 350 × 400 mm
- Laser
- 500 W × 2/4/6 (8-laser in development)
Supports multi-laser configurations for complex industrial and aerospace components. Evaluate further against the material, size and geometry of the target component.
View product details→
Industrial & Aerospace System
KHL-VT500
- Build envelope
- 500 × 400 × 250 mm
- Laser
- 500 W × 4/6/8
A multi-laser production platform with exchangeable build cylinders and enclosed powder handling. Evaluate further against the material, size and geometry of the target component.
View product details→SUPPORTING SERVICES
Supporting technical services
Engage individual stages or combine services around project goals. Externally coordinated processes are identified in the final proposal.
- ＋流道可制造性评估
- ＋金属3D打印
- ＋去粉与去支撑
- ＋Heat Treatment
- ＋精密加工与密封面处理
- ＋检测与性能验证协同
START A PROJECT
Have a drawing, material requirement or unresolved manufacturing challenge?
Share drawings, material, critical dimensions and target performance for an initial manufacturability assessment.